PAT Testing in Tavistock, Plymouth and Across Devon
In-service inspection and testing for shops, offices, pubs, holiday lets and any premises with staff and equipment.
If you have ever been asked for a PAT testing certificate and quietly wondered whether you actually need one, you are in good company. Portable appliance testing is one of those jobs that sits on a premises checklist without much explanation attached.


Here is the short version.
The law asks you to keep the electrical equipment used in your business maintained and safe. PAT testing, properly called in-service inspection and testing of electrical equipment, is the usual way to show that you have done it. What it is not is a rule that every plug in the building must be tested every twelve months, whoever tells you otherwise.
What portable appliance testing actually covers
The word portable is misleading. It covers anything that plugs in and is not part of the fixed wiring, from the kettle in the kitchen to the extension lead under a reception desk. A monitor, a phone charger, a printer, a fan heater and a hand dryer all count, and so does the lead that feeds them.
- IT equipment, monitors, docking stations and chargers
- Extension leads, trailing sockets and adapters
- Kitchen appliances, kettles, fridges and microwaves
- Cleaning equipment and vacuum cleaners
- Power tools and bench equipment
- Portable heaters, fans and dehumidifiers
- Shop fittings, tills, display lighting and hand dryers
Every item is inspected by eye first and tested second. That order matters, because a cracked casing or a scorched plug top is usually spotted before the meter is even connected.


What the law actually asks, in plain English
The Electricity at Work Regulations 1989 require electrical equipment used at work to be maintained so that it cannot cause danger. That is the duty. How you meet it is a matter of judgement, and the accepted way is a risk-based programme of inspection and testing, as set out in the IET Code of Practice for In-service Inspection and Testing of Electrical Equipment.
So there is no legal requirement to test every item every year. What you do need is an interval that reflects how hard the equipment works, where it lives and who uses it. A laptop on an office desk and a hedge trimmer in a workshop do not carry the same risk, and it would be odd to treat them the same.
What a visit involves, step by step
We agree the scope with you before we arrive, so you know what is covered and roughly how long we will be on site. On the day it usually runs like this.
- Agree the scope so the item count, the locations and any access or out of hours needs are known in advance
- Walk the site with you or a keyholder, room by room, so nothing is missed in a back office or a store cupboard
- Inspect each item for damaged flex, cracked casing, the wrong fuse, scorch marks and hopeful DIY repairs
- Test each item with a portable appliance tester and record the result against the item itself
- Label every item that passes with the test date and the date the next test is due
- Record the results in a register that stays with you and can be updated as equipment changes
- Flag anything that fails and take it out of use there and then
A failed item is labelled, recorded and separated from everything else, and we tell you what the fault is. From there you can have it repaired and retested, or replace it. If a replacement is the sensible answer, our computer shop in Tavistock can usually help with the IT side of that.

Labels, certificates and the register
The label on the plug
Each item that passes gets a durable label showing the test date and the next due date. It is a small thing, but it is what a landlord, an auditor or an insurer will look for when they glance behind a desk.
The register and the certificate
Every item is recorded against a location and, where you have them, an asset number. You get a certificate for the visit and a register of results as a working document. Between them, they answer the question that gets asked months later, which is simply whether a particular appliance was safe on a particular date.
✅ A visual inspection of every item in scope
✅ Electrical testing with the result recorded item by item
✅ A dated label on every item that passes
✅ Failed items identified, labelled and withdrawn from use
✅ A certificate for the visit
✅ A register of results you can keep and update
✅ A reminder before your next test date is due

How often should a business test
Frequency follows risk, and the IET Code of Practice is the reference we work to. A quiet office with desk based equipment is often fine on an annual cycle. Kitchens, workshops, salons, pubs and holiday lets usually want a shorter interval, because the equipment is used harder, moved about and handled by more people.
Rather than leave you guessing, we put a recommended interval in writing with your certificate. That way the next review is a decision with a reason behind it, not a date somebody half remembers.
Reminders so a certificate never lapses
Testing is recurring work, so we treat it that way. Your next date goes into our diary, and we get in touch a few weeks before it falls due. If equipment has been added during the year, we can fold it into the same visit and update the register rather than starting a second list.
It sounds mundane, and it is. It is also the difference between a certificate that is current and one that quietly ran out two summers ago.
Who we test for
We look after landlords, letting agents and holiday let owners, along with offices, shops, pubs and cafés, schools and nurseries, village halls and community buildings, workshops, salons and care settings. Anywhere with staff and equipment, in other words.
For landlords in particular, PAT testing sits neatly alongside the other checks a let property needs, and it is much easier to keep on top of when the same firm holds the dates. If you also need help with the tech in a home office or a rental, our home IT support covers that side of things.
Pairing it with the rest of your IT
Most of the items on a PAT register are IT equipment, so the two jobs overlap more than people expect. Where we also look after your managed IT services, the asset list and the test register can be kept in step, and new starters do not quietly add three untested chargers to a meeting room.
If you already have business IT support with us, say so when you book and we will check the records before we arrive. It saves time on the day and it keeps the paperwork in one place.

Where we work
We cover Tavistock, Plymouth, Okehampton, Exeter, Launceston, Liskeard and the villages in between, across Devon and Cornwall. If you are on the edge of that map, ask anyway. We are usually somewhere nearby. Our wider computer support in Devon covers repairs, security and advice if the same visit throws up something else.
PAT TESTING FAQ
Is PAT testing a legal requirement?
Not in the way most people assume. The law requires electrical equipment used at work to be maintained so that it is safe, and PAT testing is the usual way to demonstrate that. There is no rule that every item must be tested every year.
How often should portable appliances be tested?
It depends on risk rather than a blanket rule. A quiet office can often work to an annual cycle, while kitchens, workshops and holiday lets usually need more frequent checks. We recommend an interval in writing after the first visit.
What counts as a portable appliance?
Anything that plugs in and is not part of the fixed wiring. That includes monitors, chargers, extension leads, kettles, printers, heaters, power tools and cleaning equipment.
Do extension leads and chargers really need testing?
Yes, they are among the most used items on any site and among the most commonly damaged. Trailing leads get run over, pulled and daisy chained, so they are inspected and tested like everything else.
What happens if an item fails the test?
It is labelled, recorded and withdrawn from use straight away. We tell you what the fault is, and you can then have it repaired and retested or replace it.
Do we get a certificate and a register of results?
Yes. You get a certificate for the visit and a register listing every item, its location, the result and its next test date.
How long does a visit take?
It depends on how many items you have and how spread out they are. Most single site visits are done in a morning or an afternoon, and we agree the scope beforehand so there are no surprises.
Can you test our IT equipment as well?
Yes. Laptops, monitors, docking stations and chargers are all in scope, and testing them alongside the rest of the building leaves you with one register rather than two.
Do you cover Plymouth, Okehampton and the wider area?
Yes. We work across Tavistock, Plymouth, Okehampton, Exeter, Launceston, Liskeard, Devon and Cornwall. If you are further out, ask and we will tell you honestly whether we can reach you.
How much do you charge for PAT Testing?
We charge based on time, we have simply put this as our standard callout fee and chargeable by the hour dependent on the engineer chosen.

Talk to us about your premises
Tell us roughly how many items you have and how many sites are involved, and we will quote per site rather than per item. That keeps the figure honest for a small shop and for a business with three floors and a workshop.
Call 01822 613154, or use the contact page and we will come back to you the same working day. If you would rather pick a slot straight away, the bookings page shows what is free.
ABC Service
69 West Street, Tavistock
Devon, PL19 8AJ
Phone: 01822 613154
Monday to Friday - 9am to 5pm
Saturday - 9am to 4pm
Sunday - Closed
